High Quality Can Be Customized Tri-Ring 4750+1350mm Yzz5250txjst6 New Manual Diesel Workover Rig

Product Description

Tri-Ring Special Oil Drilling and Production Equipment Workover Rig Well Repair Vehicle

Product Description

Workover Rig
Well-repair vehicles (well-repair machines) are special oil drilling and production equipment. Well, repair machines or well dredging machines are the most basic and main power sources in well repair and underground operations. According to their operating structure, they are divided into crawler type and tire type.

Well, repair operations are to operate well repair equipment on the ground to repair oil, gas, and water wells hundreds or even thousands of meters underground. In oil well maintenance, winches, derricks, traveling block hooks, and other tools are used to lift and lower oil pipes, pump rods, check pumps, and clean sand; in overhaul operations, turntables, faucets and downhole tools are used to carry out side drilling deepening, salvage and unblocking, and casing repairs; in production and injection increase measures, circulation equipment is used for acid fracturing, channeling detection and sealing, water plugging and other operations.

Product Parameters

Workover Rig
Manufacturing Company Name			Hubei TRI-RING Automobile Co., Ltd.
Vehicle Model			YZZ5250TXJST6 Workover Rig
Basic Vehicle Parameters	Drive Type		6×4
	Total Mass (kg)		24500
	Curb Mass (kg)		24305
Vehicle Appearance Parameters	Length (mm)		15750
	Width (mm)		2550
	Height (mm)		3980
	Wheelbase (mm)		4750+1350
Performance Parameters	Maximum Speed (km/h)		89
	Maximum Climbing Grade (°)		30%
Chassis Configuration Parameters	Engine	Engine Emission Standards	Euro II, III, IV, V, VI
		Manufacturer	Guangxi Yuchai Machinery Co., Ltd./Weichai Power Co., Ltd.
		Displacement (L)	6.2-7.5L
		Rated Power (kw)	199-221
Chassis Configuration Parameters	Cab	Type	Half-High Roof Comfort Version Cab
		Model	T280 (2.25 Wide)
		Standard Configuration	Bluetooth Receiver, Laminated Glass, Electric Doors And Windows, Central Locking, Wide Bumper, Roof Sundries Box, Multi-Function Steering Wheel, External Sunshade
	Transmission	Gearbox Type	Manual, 9 Gears
	Front Axle	Type	Drum Brake
		Loadable Mass (kg)	5000
	Rear Axle	Type	Drum Brake
		Loadable Mass (kg)	10000
		Speed Ratio	5.571
Chassis Configuration Parameters	Frame	Cross-Sectional Dimensions (mm)	300×80×(8+5)
	Leaf Spring	Number Of Plates	10 Front Springs, 12 Rear Springs
	Tire	Type	Wire Tire
		Quantity	10+1
		Model	11.00R20-18
	Steering System	Type	Hydraulic Power Steering System
	Braking System	Brake Type	Drum Brake, With ABS Anti-Lock Braking System
		Service Brake System Type	Dual Circuit Air Brake
		Parking Brake System Type	Spring Break
		Parking Control Type	Hand Brake Operation
	Electrical System	System Voltage	24V
		Battery	140AH Dual Battery
Top Configuration Parameters	Well Washing Machine	Maximum Static Hook Load (kn)	675
		Rated Hook Load (kn)	400
		Large Hook Lifting Speed (M/S)	0.11-1.15
		Derrick Height (M)	18/21/23
Other Configuration		Triangular Warning Sign, Tool Kit, Spare Tire At The Rear Of The Frame, ABS, And Air Conditioning.

Detailed Photos

Good mobility

The workover rig is usually installed on a vehicle chassis and has good mobility. It can be easily moved from one well site to another, adapting to the repair and maintenance of oil wells, gas wells, or water wells in different geographical locations.

Efficient Operation Capability

The workover rig is equipped with a powerful power system. Its engine can provide sufficient power for the lifting system, circulation system, etc. to achieve efficient workover operations. For example, in operations such as lifting and lowering oil pipes and pumping rods, it can quickly lift or lower downhole equipment. Its lifting speed can be adjusted according to actual work needs. Generally, the lifting speed can reach tens of meters per minute, which greatly improves the work efficiency of workover.

Versatility

The workover rig integrates a variety of workover tools and equipment. It generally includes the main components of the derrick, overhead crane, traveling block, hook, turntable, winch, etc. The derrick can provide sufficient height to facilitate the lifting and lowering of downhole equipment; the overhead crane and traveling block can cooperate with the wire rope of the winch to achieve the smooth lifting and lowering of heavy objects; the turntable can drive the downhole drilling tools to rotate for drilling, reaming and other operations; the hook is used to hang downhole pipes and other equipment.

Adapt To Complex Working Conditions

The workover rig is designed to adapt to different well depths and well conditions. It can perform effective workover operations in both shallow and deep wells. For shallow wells, the workover rig can quickly complete the workover task by adjusting the lifting parameters; for deep wells, it can ensure safe lifting and lowering of underground equipment by increasing the length and strength of the wire rope.

  Working Principle Of Workover Rig
The principle of vehicle-mounted self-propelled drilling rigs and workover rigs is: that the mechanical transmission system drives the turntable to rotate and drill, and the drum winch is used to lift the drilling tools. During the drilling construction, the well washing and cementing operations are completed by the solid pressure equipment.

However, this type of equipment has the disadvantages of single function, complex operation, high labor intensity, low efficiency, and difficulty in changing the drilling process. Since the well washing cycle and cementing operations must be completed by the solid pressure equipment, the drilling efficiency is greatly affected and the drilling cost is increased.

Company Profile

Researched by board of directors of Tri-Ring Group Company and approved by Hubei SASAC, Hubei Tri-Ring Motor Industrial Park was initiated on April, 28th 2010 and was put into operation in 2014 according to the revitalization plan of auto industry in Hubei Province and the twelfth five-year plan of Tri-Ring Group Company.  The park is in an irregular rectangular shape, with a length of 1148m and width of 643-814m. It has a floor area of 718013m2 and building area of 470700m2.
Hubei Tri-Ring Motor Co., Ltd. has gained over 40 years experiences in the R&D of special purpose vehicles. It created a well-structured, highly competent and highly efficient R&D team which can meet with the trend of auto industry as well as the development demand of the company. Tri-Ring R&D center has been accredited as provincial  enterprise technical center, High-tech enterprise, Engineering Research Center and Innovative enterprise etc. ever since 2010. It carries out long-term cooperation with renowned institutes and engineering companies like Wuhan University of Technology, Huazhong University of Science and Technology, TJ Innova Engineering & Technology Co., Ltd. etc.
The company has a national standard vehicle testing center, of which there are various testing facilities of 265 sets, fulfilling 35 different performance tests to chassis, complete vehicles and key auto parts in terms of power performance, fuel consumption performance etc.
The company possesses a flexible assembly line for heavy, medium, light duty traditional diesel chassis and new energy chassis (including subassembly of engine, gearbox and axles), as well as commercial vehicle production line relating to stamping, metal processing, welding, refitting and painting, which is capable of producing various commercial vehicles of 50,000 units annually.
The company has its own cabin factory. It has over 400 sets of equipment for stamping, welding, painting, assembly, metal cutting, heat treatment and power supply, of which there are over 60 sets of press machines of  10T-1300T and over 1000 sets of  large scale and medium scale jigs and molds. The cabin factory is capable of developing and manufacturing cabins for heavy, medium, light and agricultural vehicles, with an annual productivity of cabins for 30,000 units heavy and medium vehicles, stamping parts for 800,000 units, and window glass regulators for 1,000,000 units.
 Huanmin auto parts company is a wholly-owned subsidiary of Hubei Tri-Ring Motor Co., Ltd. Huanmin is mainly engaged in the manufacturing of parts for auto chassis, of which frame is its key product. Its current annual productivity of frame is 20,000 units.
The company has a comprehensive and mature sales network of over 200 distributors and service network of over 500 service stations all over China. Besides, its products are widely exported to overseas market including South America, Southeast Asia, Africa, Middle East etc. Worth to mention, its electric vehicles were exported to South America in large quantities.

FAQ

Q1. Is your company a factory or a trading company?
A: We are a leading manufacturer of special trucks, tank trucks, trailers, and spare parts in China. Welcome to visit our special vehicle production base in Suizhou City, China.

Q2. What are your payment terms?
A: T/T 30-50% as deposit, the rest to be paid before delivery. We will show you photos of the products and packages before you pay the balance.

Q3. What are your delivery terms?
A: EXW, FOB, CFR, CIF, DAF, DDU.

Q4. How about your delivery time?
A: Generally, it takes 20 to 30 days after receiving the advance payment. The specific delivery time depends on the items and quantity of the order.

Q5. Can you customize the products to meet my requirements?
A: Yes. We have a professional R&D team, and we can produce products exactly as you require.

Q6. What is the price of your products?
A: We are factory direct sales, so the price is very competitive. Different products have different prices. The price
also depends on your special needs. To know the exact price, please contact us!

Q7. Do you test all the goods before delivery?
A: Yes, we do 100% testing before delivery.

Q8. What service can I get from you?
A: We provide lifetime tracking service and a one-year free warranty for all our products. At the same time, we provide free training and technical support to guide you to repair the product. We will also provide original spare parts if necessary, and you only need to pay the shipping cost.